Botou Xinchen Environmental Protection Equipment Co., Ltd.
Botou Xinchen Environmental Protection Equipment Co., Ltd. Main business: industrial dust collector,Dust Collector Bags,Dust collector parts
Add to Cart
13000-22500m3/h 150m2 Flue Gas Desulfurization Equipment
introduction of two main type
A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor.
B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.
Techinal parameters
| Model | filting area(m2) | air volume(m3/h) | filting airspeed(m/min) | working resistance(Pa) | dust removing pressure(Mpa) |
| DMC-32 | 30 | 2880-4800 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-48 | 48 | 4320-7200 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-60 | 60 | 5400-9000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-72 | 72 | 6480-10800 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-90 | 90 | 8100-13500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-120 | 120 | 10800-18000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-150 | 150 | 13000-22500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-180 | 180 | 16200-27000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-210 | 210 | 18900-31500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-250 | 250 | 22500-37500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-270 | 270 | 24300-40500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-300 | 300 | 27000-45000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-340 | 340 | 30400-51000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-420 | 420 | 37800-63000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-500 | 500 | 45000-75000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-600 | 600 | 54000-90000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-740 | 740 | 66600-111000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-870 | 870 | 78300-130500 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-1000 | 1000 | 90000-150000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
| DMC-1100 | 1100 | 99000-165000 | 1.5-2.5 | 800-1800 | 0.4-0.6 |
The customized dust catcher are composed by the filter chamber housing, clean air chamber enclosure, filter bag, filter cage, pulse injection device, ash hopper, screw conveyor and discharger, etc. At the end, it needs centrifugal fan for power system. In another type of dust catcher, the dedusting job can be done by every chamber isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller.
Equipment advantages
Pictures
